Safety
15
l) Keep the power source free of debris and the accumulation of other
materials to prevent damage to it or a possible fire.
m) Do not transport the device whilst the power source is running.
n) Stop the device and pull the plug out of the socket. Make sure that all
moving parts have come to a full stop
• whenever you leave the device unattended,
• before removing a blockage or rectifying obstructed ducts,
• before inspecting, cleaning or performing any other work on the
device.
o) Do not tip the device whilst the power source is running.
Maintenance and storage
a) If the device is stopped for maintenance, inspection, storage or in
order to change accessories, switch the power supply off, disconnect
the device from the mains and make sure that all moving parts have
come to a full stop. Let the device cool off before inspecting it, performing
settings, etc. Maintain the device with care and keep it clean.
b) Store the device in a dry place out of the reach of children.
c) Always let the device cool off before storing it.
d) When performing maintenance on the shredder, please keep in
mind that although the power source has been switched off by the
locking function of the protective equipment, the shredder can still
be moved.
e) Replace worn or damaged parts for reasons of safety. Only use
original spare parts and accessories.
f) Never attempt to bypass the locking function of the protective
equipment.
g) Switch the device off before attaching or removing the bag.
Recommendation
a) The device should be operated with a residual current protective
device (RCD) with a maximum release current of no more than 30 mA.
b) Do not operate the device in poor weather conditions, especially if
there is a risk of lightning.
