background image

AFTER SALES SUPPORT

   

  0151 649 1500      

  1890 946244

  www.einhell.co.uk

19

 

 

25cc Petrol Grass Trimmer – GLPT 2538

Safety

AFTER SALES SUPPORT

   

  0151 649 1500      

  1890 946244

 

 

  www.einhell.co.uk

18

25cc Petrol Grass Trimmer – GLPT 2538

Safety

d)   Remove all adjusting tools or spanners before you switch 

the petrol machine on. A tool or spanner in contact with 

a rotating part of the device may result in injury.

e)   Avoid an abnormal posture. Maintain a safe stand and 

keep your balance at all times. This will allow you to 

have better control of the petrol machine in the event 

of unexpected situations.

f)

   Wear suitable clothing. Do not wear any loose-fitting 

clothing or jewellery. Keep your hair, clothing and 

gloves away from the moving parts. Loose clothing, 

jewellery or long hair may get caught in the moving parts. 

It is recommended that you wear firm gloves, sturdy 

non-slip footwear ear defenders and protective goggles.

4.  Using and handling the petrol machine

a)  

Do not overload the device. Use the right petrol 

machine for your work. The right petrol machine will 

ensure that you work more effectively and safely within 

the specified power range.

b)  

Do not use a petrol machine if its switch is defective. 

A petrol machine that can no longer be switched on or 

off is dangerous and must be repaired.

c)  

Pull off the spark plug boot and remove the spark 

plug before you make any adjustments to the device, 

or make changes to the line spool. This precaution will 

prevent the petrol machine from accidentally starting.

d)  

Keep unused petrol machines out of the reach of 

children. Do not let persons use the device who are 

not familiar with the device or have not read these 

instructions. Petrol machines are dangerous if used by 

inexperienced persons.

m)  

Do not use any other cutting tools. For your own safety 

you must use only the accessories and attachments 

which are listed in the operating instructions or which 

are recommended or specified by the manufacturer. 

The use of cutting tools or accessories other than those 

recommended in the operating instructions or catalogue 

may place your personal safety at risk. Using non-

approved accessories with the machine can result in 

accident or injury.

3.  Safety of persons

a)    

Be careful, pay attention to what you are doing and 

approach work with a petrol machine in a reasonable 

manner. Do not use any petrol machine if you are tired 

or under the influence of drugs, alcohol or medication. 

A single moment of inattentiveness when using the petrol 

machine can result in serious injury.

b)  

Always wear personal protective gear and a breathing 

mask in necessary. Depending on the type of petrol 

machine and how it is used, wearing personal protective 

gear such as a dust mask, non-slip safety shoes, a 

protective helmet or ear protection reduces the risk 

of injury. If you have long hair, wear a hair net. Use a 

breathing mask if performing dusty work.

c)  

Avoid accidents whilst carrying the device between 

using. Make sure that the petrol machine is turned off 

before you pick it up or carry it. If the engine is running 

and you have your hand/fingers on the throttle lever and 

throttle lock when carrying the petrol machine, this may 

cause an accident.

Summary of Contents for GLPT 2538






























Reviews: