Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8856
Helpline No. UK/Northern Ireland 0151 6491500
Rep. Ireland 1890 946244
Model Number: 8856
18
19
13
12
Important!
Always wait until the shredder has reached a
standstill before you switch it on again.
Large items or pieces of wood will be discharged both in the
cutting and in the release direction after the blade has been
started and reversed several times.
Motor protection (Fig. 13/Item D)
An overload (for example if the blade is jammed) will cause
the machine to cut out after a few seconds. To protect the
motor from damage the motor protection switch stops the
power supply automatically. Wait for at least one minute
before you press the reset knob so that you can restart
the machine.
Then press the ON/OFF switch.
Instructions
5
Operation
Please observe the statutory regulations governing noise
abatement during operating times, which may differ from
town to town.
Mains connection
Connect the device with an extension lead connected to the
integrated power plug (Fig. 13/Item E). Be sure to observe
the relevant information in the safety instructions.
ON/OFF switch (Fig. 13/Item B)
•
Press the green knob to switch on the shredder.
•
Press the red knob to switch it off.
Note:
The device has a zero voltage switch. This prevents the
device restarting unintentionally after a power failure.
Safety switch (Fig. 12/Item A)
When using the device the shredded material debris box
must be securely in position and the safety switch locked as
shown in Fig. 12.
Direction selection switch (Fig.13/Item C)
Important! The switch for selecting the direction of rotation
can only be moved when the shredder is switched off.
Position “ ”
The material is automatically drawn in by the blade
and shredded.
Position “ ”
The blade rotates in the opposite direction to release
jammed material. After moving the selector switch to the
“ ” position, press and hold the green knob of the ON/OFF
switch. The blade will start to rotate in the opposite direction.
As soon as you release the ON/OFF switch, the shredder will
stop automatically.
7893 GLSS2540 User Guide AW.qxd 2/6/08 1:33 pm Page 19
