D
B
C
Set-up
Outdoor Screen House
USA
STEP3
STEP3
6
1877 579 1550
info@westfieldoutdoors.com
AFTER SALES SUPPORT
USA
STEP 3: Assemble Screen House
A)
Place the roof poles in position for installation.
B)
Begin with Roof Middle Pole (C) and slide it into its middle roof sleeves
Finish securing by inserting both pole ends into the pole pockets above each
door zipper.Take a Roof Pole (B) and slide it into its sleeves;then insert the
end into the ribbed side of one Elbow Connector (F) at a roof corner. Gently
flex pole into an arch and secure pole ends into its own ribbed side of elbow
connecctors. Repeat with the other poles.
CAUTION: make sure all pole sleeves are evenly distributed along their
poles; if pole joints catch on fabric, they can suffer undue stress and break
pole or tear fabric.
C)
Place one end of a steel leg pole (D) into the smooth end of Elbow
Connector (F) ,then secure the other end of the leg pole onto the pin-rings at
base of tent. Repeat with the remaining steel leg poles.
D)
Secure poles with fabric ties as shown in illustration.
