22
22
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028 (toll free)
MODEL No.: HYSB-125PP
62809 01/2019
12. Troubleshooting
Fault
Cause
Remedy
Pump does not start
Battery not inserted
correctly.
On/off switch (5) is in
the Off position.
Carbon brushes
require replacement.
Connect the battery
correctly.
Press reset button (6)
after re-connecting
battery correctly.
Turn on the on/off
switch (5).
Pump has little or no
flow rate
Battery (11) is low on
power.
Filter is blocked.
Charge the battery
(11).
Clean filter and
remove the
obstruction.
Pump has little or no
lift.
Battery (11) is low on
power.
Impeller is blocked.
Replace the battery.
Clean impeller
and remove the
obstruction.
Periodic Maintenance
Regular service period
Each use
1000hrs.
2000hrs.
Item
Battery
Check
Motor
Clean
Carbon brush
Replace *
Remark:
Failure to follow this maintenance schedule could result in non-
warrantable failures.
* Replacement carbon brushes are available for purchase by contacting
Customer Service on 1300 889 028