UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PGS-2800
18
Starting the motor
1. Ensure that the shredder is empty before starting the motor.
2. Position the collection box below the shredder and lock it
with the hand grip of collection box (moving upwards).
3. Connect the shredder power cord to an appropriate
extension cord and plug it in to the mains power.
4. To start the motor, first make sure the Forward/Reverse
switch is in the forward position and then press the green
section of the on/off switch.
Stopping the motor
Stop the motor by pressing the red section of the on/off switch
marked with an ”O ”.
Do not feed in any material after the motor has been
stopped. This will get caught in the machine and can
make restarting impossible.
Changing direction of rotation
The rotation direction switch can only be used if the
shredder is switched off.
Forwards:
For forward action turn the forward/reverse switch down. The
cutting blades pull the material in and shred it.
Reverse position:
The cutting blades run in the opposite direction and release the
clogged material. Press the green on switch after you have
moved the forward/reverse switch up. The cutting blades run
now in the opposite direction. If you release the on/off switch,
the shredder will stop immediately.
operating instructions
5
