After Sales Support TEL: 1300 130 579 WEB: www.rossmac.com
8
Installation
1. Screw the motor unit (Fig. 4/Item 1) and the
base frame (Fig. 4/Item 3) together. Use the
screws (Fig. 3/Item 12) and washers (Fig. 3
Item 13) to do so (Fig. 5).
5
4
7
6
8
9
2. Fit the wheels to the base frame. To do so,
slide one sleeve each into the hole in each of
the wheels (Fig. 6). Then insert one screw
with washer through each sleeve (Fig. 7) and
screw the wheels to the base frame (Fig. 8).
To do so, fit one washer in front of the
tubular rod and one behind it. Press the
wheel caps onto the wheels (Fig. 9).
