VIII. CLEANING AND MAINTENANCE
After use, the surface of the Sprayer shall be
washed in an allowed cleaning site; the inner
part should be cleaned with high-pressure
injection till the drainage becomes clean.
The Spraying parts shall be lubricated after
cleaning.
X. STORAGE
The spray should be stored in a dry place indoor
out of reach of children.
XI. TROUBLESHOOTING
Problems
Causes
Solutions
In case of
leakage or
poor spraying
performance
Seal rings at
various joints
may loose or
be damaged.
Leakage of
the cylinder
Tighten or
replace ;
Hard to turn
the rock bar
The shut-off
strainer or
the spray
nozzle
has been
blocked;
Clean the
strainer and
spray nozzle
immediately;
Apply
lubricant
grease to
various
moving part.
In case of
decreasing of
pressure
Broken
leather cup,
damaged
seal ball or
loose seal
ball holder.
Replace the
leather cup
or seal ball,
or tighten
the seal ball
holder.
It produce no
pressure to
turn the rock
bar
Seal ball may
be displaced
or lost.
Re-install
seal ball.