5
①
3.1 Interlock switch pusher
After pushing the grass box, make sure the interlock switch pusher be in the “on” position.
Before pulling out the grass box, make sure the interlock switch pusher be in the “off”
position.
The instruction for using the interlock switch pusher:
①
press the red button
②
push or pull the
pole of the interlock switch pusher towards down or up, so make the switch on or off.
Interlock switch pusher
①
start button
②
stop button
③
running button
④
reverse button
⑤
Reset button(overload
protector)
3.2 control panel
green button”1”—start the shredder
red button”0”—stop the shredder
note: the machine is equipped with a safety switch to prevent it from being switched on again
accidentally after a power failure.
3.3 reverse switch
button
“
“
“
“
”-clockwise
when the machine reverses, press the button
“③
③
③
③
”to make it run, then cutting the branch.
button “
”-anticlockwise
when the machine is running, press the button
“④
”to make it run in the reverse position, pulling
out the branch.
Summary of Contents for GBV2501SWB
Page 69: ...5...