Page
35
GARDTEC
800 Series
ACE User Instructions
ACE (Advanced Control Equipment) allows control of your Gardtec
800 Series
system
via Infra-Red Remote control. Ace is available built in to a range of keypads or as a
stand alone unit, control is via neat remote keyfob(s).
We strongly advise that User Number 1 is not used for ACE in order that the user
retains control of the programming functions.
Setting the System with ACE
1)
Point the keyfob at the ACE receiver and press the button.
2)
When the exit tone sounds exit the premises in the usual way.
Part Setting the System with ACE
1)
Point the keyfob at the ACE receiver and press the button.
2)
When you hear the exit tone press the keyfob button again
(within 3 seconds) for Part Set 1.
or
Press 1, 2 or 3 on the receiver/keypad for the Part Set you require.
Unsetting the System with ACE
1)
Enter the premises via an authorised entry point.
2)
Point the keyfob at the receiver and press the button.
User Manual
combi.qxd 12/01/99 09:00 Page 35
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
