Page
3
GARDTEC
800 Series
User Manual
Introduction
The Gardtec
800 Series
of control panels consists of 3 models, the Gardtec
800
, the
Gardtec
816
and the Gardtec
840
. Two types of display variation are also available,
LCD giving two rows of 16 character English text and LED giving two 7 segment LED
digits.Throughout this manual references will be made to the specific model of
control panel and also the display type. You may find this information from the
user information section on page 2 of this manual.
Please take time to familiarise yourself with the type of equipment fitted to your
premises as it will prove invaluable whilst using this manual.
User Code Types
Four types of User Codes are available on the Gardtec
800,
and six types on the
Gardtec
816,
each user code type allows for different levels of access. In total 7 User
codes may be programmed by a Master Level User Code.
User number 1 will always be a Master Level User but the remaining 6 User Codes
may be programmed (by a Master Code) to the required level of access. These may be
changed at any time via a Master level code
The User Code levels available and the functions available for the levels are:-
1 = Set Only
Only Allows for the setting of the system.
2 = Main User
Allows Setting, Part Setting, Zone Remove (if programmed
by engineer), System Test, Unsetting, Reset after Alarm (if
programmed by engineer).
3 = User
Allows Setting, Part Setting, Reset after Alarm (if
programmed by engineer), Unsetting.
4 = Master
Allows Setting, Unsetting, Zone Remove (if programmed by
(User 1 always Master)
engineer), Test System, View Log, Chime On/Off, User
Codes, Set Time/Date, Reset After Alarm (if programmed
by engineer), Unsetting.
5 = Cleaner
Full System Setting (from unset system),
(816 Only)
Cleaner Area Unsetting (from set system),
Cleaner Part Set (from part cleaner set system).
6 = Duress
Initiates a Duress call to Central Station whilst appearing
(816 Only)
to operate the system as normal.
Note:
For information on using Duress on the Gardtec
Series
see Using
Duress Section.
combi.qxd 12/01/99 09:00 Page 3
Technical Manuals Online! - http://www.tech-man.comTechnical Manuals Online! - http://www.tech-man.com
