background image

1.0  Description  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2.0 Safety Symbol Definitions  . . . . . . . . . . . . . . . . . .2

3.0 Warnings  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

4.0 Grounding Instructions . . . . . . . . . . . . . . . . . . . . .3

5.0 Technical Specifications  . . . . . . . . . . . . . . . . . . .3

6.0 Product Description  . . . . . . . . . . . . . . . . . . . . . . .3

7.0 Use and Operation . . . . . . . . . . . . . . . . . . . . . . . .4

7.1 Blowing Line in Conduit  . . . . . . . . . . . . . . . . .4

7.2 Preparation  . . . . . . . . . . . . . . . . . . . . . . . . . .4

7.3 Selecting the Pull Lines  . . . . . . . . . . . . . . . . .4

B3000 Blower for B60

B4500K Blower Kit

RPS-0106

01/02 

Instruction Sheet

B4500K, B60, BV208DA

IMPORTANT RECEIVING INSTRUCTIONS

Visually inspect all components for shipping damage. If shipping damage is found, notify carrier at once. Shipping damage is NOT
covered by warranty. The carrier is responsible for all repair and replacement costs resulting from damage in shipment.

SAFETY ISSUES

IMPORTANT – USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to select the
proper components and design to insure appropriate that all safety measures have been taken to avoid the risk of personal injury
and property damage from your application or system.

GARDNER BENDER IS NOT RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE USE, MAINTENANCE OR THE
APPLICATION OF ITS PRODUCTS. Please contact Gardner Bender for guidance when you are in doubt as to the proper safety
precautions to be taken in designing and setting up your particular application.

7.4 Power Saver™ Line Packages  . . . . . . . . . . .5

7.5 Tag-Along™ Line Packages  . . . . . . . . . . . . .5

7.6 PL Series Pull Line  . . . . . . . . . . . . . . . . . . . .5

7.7 Seal-Offs  . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

7.8 Line Carriers  . . . . . . . . . . . . . . . . . . . . . . . . .7

7.9 Blowing or Vacuuming Thru Conduit  . . . . . . .8

8.0 Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . .10

9.0 Jetline

®

Systems  . . . . . . . . . . . . . . . . . . . . . . . .10

9.1 B4500K Line Shooter™ Blowing System  . .11

9.2 B60 Super Blower™ System  . . . . . . . . . . . .12

BV208DA Blo-Vac™

Summary of Contents for JetLine B4500K













Reviews: