9. Storage of compressors
34
9
Stora ge of com press ors
9.1
Decommissioning
All compressors are protected against corrosion at the
factory for transport and for brief storage before
commissioning.
If the compressors are to be stored for period
exceeding six months, additional precautions must be
taken.
Compressors which are to be shut down for a lengthy
period must also be protected from corrosion.
Since corrosion occurs more quickly in damp
atmospheres than in dry conditions, it is not possible to
specify a maximum permissible standstill time which will
apply in all cases.
NOTICE
The following aspects must be taken into
account for storage of storing compressors.
The compressor should be stored in a dry
building which should be heated if possible.
This is particularly true during the months of
winter.
The coolant is to be completely drained where
there is a risk of frost (t < 33.8°F) (compressor
stage, coolers, system containers, water filters,
storage containers, RO unit, lines, valves).
If there is a risk that the temperature will fall or
rise above the limits of 14 °F to 149 °F , the
electrical controller must be removed and
stored in ambient temperatures of 41 °F to
86 °F.
Summary of Contents for EnviroAire 15
