1. Foreword
3
1. F oreword
1.1 Intended use
The control has been designed in accordance with good
engineering practice and accepted safety standards.
Nevertheless, its use may constitute a risk to the health
and safety of users or to third parties or cause damage
to the machine or to other items, if
it is not used for the purpose for which it was
intended
it is operated by untrained personnel
it is improperly modified or changed
the safety instructions are not observed.
Therefore, any person entrusted with the operation,
maintenance or repair of the machine must read and
observe the safety instructions. This must be confirmed
by signature if required.
In addition:
applicable accident prevention regulations,
generally accepted safety rules and
national regulations
must be observed.
The control must only be used in full working order and
in accordance with its intended use and the instructions
set out in the operating manual. All operators must be
fully aware of the risks involved in operating the control
and must observe all safety instructions. Any functional
defects, especially those with safety implications, must
be rectified immediately.
The control is designed exclusively for regulating
systems which generate compressed air. Using the
control for any other purpose is contrary to its intended
use. The manufacturer/supplier cannot be held
responsible for damage resulting from such use. The
risk of such misuse lies solely with the user.
Operation of the control within the limits of its intended
use also includes observation of the operating
instructions and compliance with the inspection and
maintenance instructions.
1.2 Maintenance
Servicing
Please contact your authorized Gardner Denver dealer
in the event of a fault or for spare parts. In case of
damage, our fully trained personnel will ensure that a
quick and proper repair is carried out using original
Gardner Denver spare parts. Original Gardner Denver
spare parts are manufactured using state-of-the-art
technology, thereby guaranteeing the continued reliable
operation of the unit.
In case of queries
Please note the data on the typeplate of your control.
For queries or spare parts orders, please state the
compressor type indicated on the nameplate, the
identification no. and the year of construction. This
information will ensure that you receive the right
information or required spare part.
