2
IMPORTANT:
READ PRIOR TO STARTING THIS EQUIPMENT
1.0 INSTALLATION
1.1 Location
A. For typical placement in a compressed air system, see
drawing.
B. Air compressor intake–Locate air compressor so that
contaminants potentially harmful to the dryer (e.g.
ammonia) are not drawn into the air system.
C. Dryer should be installed in a moderately heated, well
ventilated area. Avoid locations immediately adjacent
to cold exterior windows or walls, or adjacent to high
temperature ovens or boilers.
D. Clearances: Minimum requirements for free air flow and
service access
Front 36 inches (914 mm)
Back 6 inches (152 mm)
Sides 36 inches (914 mm)
E. Standard units are designed to operate in ambients:
Air-cooled: 40 to 110°F (4 to 43°C).
Water-cooled: 40 to 130°F (4 to 54°C).
F. Installations in altitudes above 4500 feet (1370 meters) –
Dryer is adjusted to operate in altitudes up to 4500 feet
(1370 meters). If dryer is installed in an altitude above
this, and has not been preset at the factory for this
altitude, contact manufacturer’s Service Department.
G. The installation of a flexible connection prior to the
dryer is recommended to prevent possible damage from
vibration.
NOTE:
Outdoor installation–Standard units are designed
for in door installation. Contact manufacturer if installing
outdoors.
1.2 Mounting
Mount the dryer on a level solid surface. Holes are provided in
the dryer base to permanently mount the dryer to the floor.
Aftercooler
Separator
Dryer
Oil Removal
Filter
Compressor
Control Panel
Air Inlet
Air Outlet
Electrical Entry
(230 VAC)
Drain Outlet
Condensor
Moisture Separator
Coalescing Filter
(Option)
Float Drain
(Standard)
Model
RNC100
Electric Time Drain
with 3-Way Valve
(Standard)
Control Panel
Air Inlet
Air Outlet
Drain Outlet
Coalescing Filter
(Option)
Moisture Separator
Condenser
Electrical Entry
(230VAC)
Models
RNC125 & RNC150
Air Inlet
Air Outlet
Condenser
Drain Outlet
Control Panel
Electrical Entry
RS 232 Entry
3-Way Drain Valve
Moisture Separator
Coalescing Filter
(Option)
Solenoid Valve
Models
RNC200, RNC250, RNC300, RNC400, RNC500, RNC600, & RNC750
