GB
- 16 -
4. Technical data
Idle speed n
0
........................11.000-21.000 min
-1
Air speed max.: .....................................150 km/h
Protection class: ................................................III
L
WA
sound power level ....................... 97.2 dB (A)
L
pA
sound pressure level .................... 85.2 dB (A)
K uncertainty ..................................... 2.49 dB (A)
Vibration a
hv
.........................................
≤
2.5 m/s
2
K uncertainty ...........................................1.5 m/s
2
Weight: .......................................................2.5 kg
The machine may exceed 85 dB (A). The operator
will require noise protection measures if this is
the case.
The speci
fi
ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci
fi
ed value
in exceptional circumstances.
The speci
fi
ed vibration value can be used for initi-
al assessment of a harmful e
ff
ect.
Important!
The vibration value changes according to the
area of application of the electric equipment and
may exceed the speci
fi
ed value in exceptional
circumstances.
The equipment, which is supplied without batte-
ries and without a charger, is allowed to be used
only with the lithium-ion batteries of the Power-X-
Change series!
Power-X-Change
•
20 V, 1.5 Ah, 5 lithium-ion cells
•
20 V, 3.0 Ah, 10 lithium-ion cells
•
20 V, 4.0 Ah, 10 lithium-ion cells
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
Power-X charger
Input voltage: .................... 200-250 V ~ 50-60 Hz
Output voltage: ....................................... 21 V DC
Output current: ........................................... . 3.0 A
Protection class: ......................................... . II /
쵭
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
5. Before starting the equipment
Caution!
The equipment is supplied without batteries and
without a charger is allowed to be used only with
the lithium-ion batteries of the Power-X-Change
series!
Power-X-Change
•
20 V, 1.5 Ah, 5 lithium-ion cells
•
20 V, 3.0 Ah, 10 lithium-ion cells
•
20 V, 4.0 Ah, 10 lithium-ion cells
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
Warning!
Always remove the batteries before making ad-
justments to the equipment.
5.1 Fitting the blower tube (Fig. 3a/b)
Plug together the blower tube (Fig. 1) and the
motor unit (Item 3). Then lock the tube in place by
twisting it clockwise.
Important!
The tube must be twisted as far as
the stop to ensure that it is locked securely.
5.2 Fitting the battery pack (Fig. 4)
Press the pushlock button of the battery pack as
shown in Fig. 4 C and push the battery pack into
the mount provided. When the battery pack is po-
sitioned as in Fig. 4b, make sure that the pushlock
button latches in place! To remove the battery
pack, proceed in reverse order.
Important!
Use only batteries which are charged to the same
level. Never combine full and half-full batteries.
Always charge the two batteries simultaneously.
The equipment‘s operating time depends on the
Anl_GALB_E_40_Li_OA_SPK7.indb 16
Anl_GALB_E_40_Li_OA_SPK7.indb 16
20.10.2017 11:53:55
20.10.2017 11:53:55
