5300 Carbon Fiber Telescopic Volleyball System
12
Maintenance
1.
General inspection of equipment when used should be performed to ensure no catastrophic failures
have occurred during the course of use between yearly inspections.
2.
It is recommended that yearly inspections be conducted to determine if any bolts or any other
hardware has become worn or loosened. A sample check sheet has been provided for you in this
guide.
3.
During yearly inspections, all moving parts should be inspected while in operation. Key points to
look for include rotation points where bushings contact metal, winches, pulleys and quick links.
The strap should be looked at for any degradation or fraying.
4.
Any loose bolts or nuts should be tightened.
5.
Check Sliding components and strap for wear.
Maintenance Check Sheet
Date: Unit: .
Anchors/Floor Sleeves
-Anchors/bolts
OK Repair Replace
-Floor sleeves/covers
OK
Repair Replace
Unit Supports / Brackets / Hinges
-Tubes; dents, stress spots, etc.
OK Repair Replace
-Bolts; loose, deformed, etc.
OK Repair Replace
-Brackets/Hinges; bent, not rotating, etc.
OK Repair Replace
Winch/Strap
-Winch; binding, loose, etc.
OK Repair Replace
-Hardware; Quick links
OK Repair Replace
Sliding Components
-Locking Mechanisms
OK Repair Replace
Safety Padding
-Velcro Function
OK Repair Replace
-Vinyl Condition
OK Repair Replace
Replacement parts and / or service to the equipment can be obtained from your local dealer or installer.
To find your local dealer, visit us online or contact customer service department at the web address or
phone number listed on the last page of this manual.
