03
BATTERIES
20
STEP 1
Check hand pump for proper operation.
Insert the hand pump filler assembly into a
jug of distilled water. Prime bulb by squeez-
ing until it is filled with water.
Ensure that the device is free of holes or
other defects.
STEP 2
Remove the dust cover on the battery hose.
STEP 3
Mate Couplers
Insert the male coupler on the HydroLink™
Watering System into the female coupler
on the Flow-Rite Hand pump.
Fig. 3.2
Fig. 3.3
Fig. 3.4
3.5.3 Using the flow-rite hand pump
To operate enclosed the hand pump for watering the batteries, please follow the
procedure below.
Note: Other Flow-Rite products recommended for the Trojan® HydroLink™ Watering
system can also be used. Please see www.flow-rite.com for more information.
Female coupler
Bulb
Male coupler
Hand pump
filler assembly
Male coupler
Summary of Contents for 1st Edition
