14
mode 1 and mode 2. Mode 1 does not change the pan and tilt settings but cycles
through all the other attributes of the fixture. Mode 2 changes all of the attributes
of the fixture, including pan and tilt, in sequence.
To put the fixture in demonstration mode 1:
1. Press the
[UP]
or
[DOWN]
button until the display reads
deMo
.
2. Press the
[ENTER]
button.
3. Press the
[UP]
or
[DOWN]
button until the display reads
Mod.1
.
4. Press the
[ENTER]
button.
5. Press the
[UP]
or
[DOWN]
button until the display reads
PAn
.
6. Press the
[ENTER]
button. The display will read a value between 0 and
255 indicating the current pan position of the head.
7. Press the
[UP]
or
[DOWN]
button until the fixture is panned to the
desired position.
8. Press the
[ENTER]
button.
9. Press the
[UP]
or
[DOWN]
button until the display reads
t!t
.
10. Press the
[ENTER]
button. The display will read a value between 0
and 255 indicating the current tilt position of the head.
11. Press the
[UP]
or
[DOWN]
button until the fixture is tilted to the
desired position.
12. Press the
[ENTER]
button.
13. Press the
[UP]
or
[DOWN]
button until the display reads
Z.oom
.
14. Press the
[ENTER]
button. The display will read a value between 0
and 255 indicating the current zoom value.
15. Press the
[UP]
or
[DOWN]
button until the zoom is at the desired
position.
16. Press the
[ENTER]
button.
17. Press the
[UP]
or
[DOWN]
button until the display reads
Go..
.
18. Press the
[ENTER]
button. The display will read run, the shutter will
open, and the fixture will begin executing a sequence demonstrating its
features.
19. To exit the demonstration mode, press the
[MODE]
button twice.
To put the fixture in demonstration mode 2, follow the procedure above and
choose the
Mod.2
option.
rESE.
– Reset. This setting can be used to reset all the functions of the
fixture. Should any of the attributes become misaligned or if there is an error, it is
a good idea to reset the fixture to see if the problem goes away.
To reset the fixture:
1. Press the
[UP]
or
[DOWN]
button until the display reads
rESE.
.
Summary of Contents for GKH 575
Page 37: ...37 VIII Photometric Data...
Page 38: ...38...