Garkinhall Systems GKH 575, User Manual

16

SPEd

(speed)– Choose one of five speed of movement settings 

listed below by using the 

[UP] 

and

 [DOWN] 

buttons until the 

display reads 

SPEd

, and then pressing the 

[ENTER] 

button. Use 

the 

[UP] 

and 

[DOWN] 

buttons to select the desired speed setting 

(

SPd.1

 – 

SPd.5

), then press 

[ENTER]

. The display will then go 

back to the next highest menu level. 

CoL.o

(color) – Choose one of ten color wheel settings listed below 

by using the 

[UP] 

and

 [DOWN] 

buttons until the display reads 

CoL.o

, and then pressing the 

[ENTER] 

button. Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired color setting (

Co.0

 – 

Co.9

), 

then press 

[ENTER]

. The display will then go back to the next 

highest menu level. 
 

CyAn

– Choose one of six cyan color settings listed below by using 

the 

[UP] 

and

 [DOWN] 

buttons until the display reads 

CYan

, and 

then pressing the 

[ENTER] 

button. Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired cyan setting (

CYA.0

 – 

CYA.5

), then 

press 

[ENTER]

. The display will then go back to the next highest 

menu level.

MAGE

(magenta) – Choose one of six cyan color settings listed 

below by using the 

[UP] 

and

 [DOWN] 

buttons until the display 

reads 

MAGE

, and then pressing the 

[ENTER] 

button. Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired magenta setting (

MAG.0

– 

MAG.5

), then press 

[ENTER]

. The display will then go back to the 

next highest menu level.

yELL

(yellow) – Choose one of six yellow color settings listed 

below by using the 

[UP] 

and

 [DOWN] 

buttons until the display 

reads 

yELL

, and then pressing the 

[ENTER] 

button. Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired yellow setting (

yEL.0

 – 

yEL.5

), then press 

[ENTER]

. The display will then go back to the 

next highest menu level.

CSPd

(color speed) – Choose one of five color-changing speed 

settings listed below by using the 

[UP] 

and

 [DOWN] 

buttons until 

the display reads 

CSPd

, and then pressing the 

[ENTER] 

button. 

Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired color-

changing speed setting (

CSP.1

 – 

CSP.5

), then press 

[ENTER]

. The 

display will then go back to the next highest menu level.

MACr

. 

(macro) – There are 30 macros built into the fixture memory. 

These macros may be accessed manually using the manual 
operation feature of the 

SPEC

menu. Choose one of 30 macro 

settings listed below by using the 

[UP] 

and

 [DOWN] 

buttons until