Garkinhall Systems GKH 575, User Manual

17

the display reads 

MACr.

, and then pressing the 

[ENTER] 

button. 

Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired macro 

setting (OFF, MA. 1 – MA.30), then press 

[ENTER]

. The display will 

then go back to the next highest menu level. To turn off the macros, 
select the 

OFF 

setting using the same procedure as above and 

press the 

[ENTER] 

button. 

EFEC

(effects) – Choose one of four effect settings listed below by 

using the 

[UP] 

and

 [DOWN] 

buttons until the display reads 

EFEC

, 

and then pressing the 

[ENTER] 

button. Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired effect [HOLE (open – no effect); 
SHA.1 – SHA.3 (three beam shaping effects); FroS (frost)], then 
press 

[ENTER]

. The display will then go back to the next highest 

menu level.

Z.oom

– Choose one of five zoom settings listed below by using the 

[UP] 

and

 [DOWN] 

buttons until the display reads 

Z.oom

, and then 

pressing the 

[ENTER] 

button. Use the 

[UP] 

and 

[DOWN] 

buttons to 

select the desired zoom setting (

Z.oo.0

 – 

Z.oo.4

), then press 

[ENTER]

. The display will then go back to the next highest menu 

level.

Stro. 

(strobe) – Choose one of nine strobe settings (plus no 

strobe) listed below by using the 

[UP] 

and

 [DOWN] 

buttons until 

the display reads 

Stro.

, and then pressing the 

[ENTER] 

button. 

Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired strobe 

setting [OPEn (no strobe); 

Str.1

 – 

Str.9

 (increasing strobe 

speed)], then press 

[ENTER]

. The display will then go back to the 

next highest menu level.

dimr

(dimmer) – Choose one of six dimmer settings listed below 

by using the 

[UP] 

and

 [DOWN] 

buttons until the display reads 

dimr

, and then pressing the 

[ENTER] 

button. Use the 

[UP] 

and 

[DOWN] 

buttons to select the desired dimmer setting (

dim.0

 – 

dim.5

), then press 

[ENTER]

. The display will then go back to the 

next highest menu level.

LA.Au

– Lamp Auto function. This function allows you to set the lamp 

to come on when the fixture is turned on. It also allows you to bypass the 
lamp on sensor for emergency operation in the event that the sensor fails. 
 
To set up the fixture so that the lamp automatically turns on when the 
fixture is powered on: 
 

1. Select the 

LA.Au

option from the 

SPEC

function of the display 

(see 

SPEC

above).