20
To turn the menu display off:
1. Select the
DiSP
option from the
SPEC
function of the display
(see
SPEC
above).
2. Press the
[ENTER]
button.
3. Press the
[UP]
or
[DOWN]
button until the display reads
On
.
4. Press the
[ENTER]
button.
5. Press the
[UP]
or
[DOWN]
button until the display reads
OFF
.
6. Press the
[ENTER]
button. The display will turn off in two
minutes.
7. Press the
[MODE]
button twice to back out of the special
functions mode.
When the menu display is off, it will turn back on when any button
on the menu display is pressed. It will stay on for two minutes after
the last button press and then turn off again.
d.Int
Display intensity setting. This setting allows you to set the
intensity of the display in five increments of 20%.
To change the intensity setting of the display:
1. Select the
d.Int
option from the
SPEC
function of the display
(see
SPEC
above).
2. Press the
[ENTER]
button.
3. Press the
[UP]
or
[DOWN]
button to select the desired value of
intensity (20%, 40%, 60%, 80% or 100%).
4. Press the
[ENTER]
button.
5. Press the
[MODE]
button twice to back out of the special
functions mode.
FEEd
– Position feedback. This setting allows you to turn on or off
the position encoder that automatically repositions the yoke in the event
that it is bumped or moved.
To turn the position encoder off:
1. Select the
FEEd
option from the
SPEC
function of the display
(see
SPEC
above).
2. Press the
[ENTER]
button.
3. Press the
[UP]
or
[DOWN]
button until the display reads
OFF
.
4. Press the
[ENTER]
button.
5. Press the
[MODE]
button twice to back out of the special
functions mode.
Summary of Contents for GKH 575
Page 37: ...37 VIII Photometric Data...
Page 38: ...38...
