Garland ARM 450, Instruction Manual

English

10/16

English

11/16

 4. BEFORE USE

 WARNING! Do not open or take apart the support 

arm! If you have any questions about the functioning 
of the support arm, take it to your nearest after-sales 
service.

Before using the support arm, you must always 
perform the following checks:

1.  Check that no screws are loose.

2.  Check that there are no cracks or defects in the 
  attachment points.

3.  That the cable and hook chain are securely 
  attached to the support arm.

4.  Check that the rest of the attachment has no 
  cracks or breaks.

5.  Check that the knob tightens correctly.

 5. OPERATION

5.1. ADJUSTING THE TENSION

5.1.1. SPECIAL POINTS BEFORE ADJUSTING THE 
TENSION

1.  Always press the lever to release the black knob    
  before turning the knob.

2.  Adjust the tension of the cable always without
  weight on the attachment. The cable must always
  be within its protective cover. This will prevent    
  any sudden or abrupt movement of the cord and it 
  causing damage to the user and people  

  surrounding.

If the cable is unwound out of its cover, reduce the 
tension and wind the cord to its proper position.
Press the lever 1 cm to the right and turn the knob 
counterclockwise.

Knob

Lever