34
PREVIOUS CHECK
Fuel level
a) Check the fuel level of the deposit.
b) If the fuel level is low, fill the deposit up to the
maximum level.
c) Use a mixture of fuel / 2 stroke synthetic oil
exclusively.
d) Do not use fuel on its own or fuel in a bad state.
e) Use recommended fuel only. This machine has a 2 stroke engine, therefore it
needs a fuel mixture and oil for 2 stroke engine.
MIX
Mix unleaded fuel grade 95 and totally synthetic oil for 2
stroke engines.
Recommended mixing ratio to 2,5% (40:1)
Each 25 cc of totally synthetic oil for 2 stroke engines with
one litre of unleaded fuel of 95 grades.
With the purpose of obtaining a good fuel mixture, place the oil in an accredited
container for fuel before placing the fuel. The use of low quality fuel and oil, can
reduce the lifetime of the pieces of the machine.
The properties of the fuel mixture can be deteriorated with time, and it must be
used before 2 months. We recommend to prepare the fuel mixture according to
the immediate necessities. Do not use more than two months fuel mixture since it
could signify a bad engine performance.
WARNING:
Shake well the fuel mixture container before pouring it into the
machine.
Keep open flames away from the area where fuel is handled or stored.
Mix and store fuel only in an approved gasoline container.
NOTE
Most engine troubles are caused, directly or indirectly, by the fuel used on the
machine. Take special care not to mix it with a motor oil for 4 cycle engines.
Maximum top
