English
30/148
English
31/148
Do not refill the machine in a closed area.
The petrol and oil vapours all contain
dangerous chemical substances. In case
of gas concentration due to insufficient ventilation,
eliminate from the work area everything that
impedes the correct flow of air and do not work in
this area again until it is well ventilated and the gas
concentration does not happen again.
Gasoline and oil are extremely flammable
and explosive under certain conditions. Do
not smoke while preparing or refueling.
Do not approach any flame or hot element to the fuel.
Do not smoke when handling fuel, when refilling or
when working.
Do not refill fuel in areas where flames, sparks or hot
sources are. Refill only in ventilated areas with engine
off. Do not overfill the fuel to try to overfill the fuel
tank. In case of fuel leakage, eliminate these before
starting the machine, do not attempt to start the
engine but move the machine away from the area of
spillage and avoid creating any source of ignition until
petrol vapours have dissipated.
Refill fuel before to start the machine. Do not unscrew
the combustible tank cap while the engine is running
or engine is hot.
Make sure the gas cap is properly closed while
operating the machine. Be sure to properly close the
gas cap after refueling.
Store fuel in a bottle or tank homologated and
according to current regulations.
2.5. USE AND CARE OF THE MACHINE
Use this brushcutter only to cut grass and small
bushes. Any other type of usage is dangerous and
run at your own risk. Do not use the machine for
other jobs. For example, do not use the machine to
cut wood, plastic materials, bricks or construction
material. The use of the machine for other uses could
be dangerous.
Use this machine and its accessories according to
the instructions provided and taking into account
working conditions and work to be done. The use
of this machine for jobs different to those stipulated
can cause danger. The manufacturer will not be
responsible for damages provoked through an
inadequate use of the machine.
Check that all security elements are installed and in
good working condition.
Remember that it is the end user operating the
machine who is responsible for any danger or
damages caused to other people or things. The
manufacturer will not in any case be held liable for
damages caused by an incorrect use of this machine.
The sharp cutting tool is very dangerous. If
instructions are not followed it will result in serious
injury.
Keep all parts of your body away from the cutting tool
during operation.
Do not force the machine over its capacity. Use the
machine for the correct job. The use of the machine
for its proper job, will ensure that you work better and
more safely.
Keep the machine with a good maintenance. Ensure
all moving parts are aligned and that no other parts
are damaged or broken. If the machine is damaged,
repair before use. Many breakages occur because
machines are poorly maintained.
Summary of Contents for BEST 521 G
