English
40/84
Clean the work area and remove all obstacles that
could cause accidents. While cutting, do not let the
tip of the chainsaw touch any log or obstacle. Remove
the chainsaw from the wood with the chain still
running. When cutting, always rest the claw of the
chainsaw on the log.
Pay extra attention when cutting wood that splinters.
Splinters can be thrown in any direction. There is risk
of injury.
Never stand on the branch you are cutting.
Always keep the chain sharp. Sharpen it as explained
in this manual.
If you make multiple cuts without letting go of the
machine, always turn the chainsaw off between cuts.
Do not cut with the tip of the bar. There is a high risk
of rebound in thecuts with the tip of the bar so they
should never be made.
Always set the machine on a flat and stable surface.
Do not use accessories in this machine except those
recommended by our company, as their use could
cause severe damage to the user, to people near the
machine and to the machine itself.
Never drop the machine and never try to stop the
chain by approaching a wood or obstacle.
7.1. MACHINE HOLDING AND GUIDING
While working always hold the chainsaw firmly with
your hand on the handle.
7.2. SHARPENING THE CHAIN
The chainsaw chain dulls as cuts are made. If you
observe any of the following symptoms it is time to
sharpen the chain:
- More effort is needed to make the cut.
- The cutting path is not straight.
- Vibrations increase.
- When cutting, sawdust is produced instead of chips.
To sharpen the chain, follow the instructions in point
8.2. ”Sharpening the chain”.
7.3. CUTTING WITH THE CHAINSAW
It is recommended that you practice with small
branches in a position that makes it easy to acquire
experience before tackling more complicated cuts.
Always follow the safety rules given in this manual.
Use this machine only for cutting wood. It is forbidden
to cut any material.
Do not use the machine to move objects.
Use the machine gently while cutting. Only use a
slight downward pressure while maintaining the
machine at full power. The own weight of the machine
will be enough to make the cut.
If the chain blocks, do not attempt to pull the
chainsaw while it is running. Stop the chainsaw by
setting the switch to “O” and use a wedge to release
the chainsaw.
7.3.1 FELLING A TREE
Felling a tree is dangerous because of the risk of the
tree or any of its branches falling on the user.
Summary of Contents for BULK KEEPER 20V 108
Page 49: ...English 49 84 NOTES...
Page 75: ...Fran ais 75 84 NOTES...
Page 125: ...Italiano 125 84 NOTES...
Page 127: ...Espa ol 127 84...
