USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 145 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
9.3 M40GSSBP
9.3.1 Fiber 40Gigabit Ethernet Technical Specifications - (40GBase-LR4) Adapters:
IEEE Standard / Network topology:
Fiber Gigabit Ethernet, 40GBase-LR4 (1310nM)
Data Transfer Rate:
40Gbit/s per port
Network ports Cables and Operating
distance:
Single mode fiber:
5000m maximum at 9 um
**
**
Theoretical Distance – Defined as half a distance
Insertion Loss ( Passive: Normal
Mode)
Typical: 1.2 dB
Maximum: 1.6dB
Insertion Loss ( Passive: Bypass
Mode)
Typical: 1.2 dB
Maximum: 1.6dB
Voltage:
12V +/-5%, 5VSB+/-5%, 5V +/-5%
Size:
102.2mm x161.9 mm x 40.5 mm (4.02” x 6.37” x 2”)
Wide x Depth x Height
Operating Humidity:
0%–90%, non-condensing
Operating Temperature:
0°C – 40°C (32°F - 104
F)
Storage Temperature:
-20
C–65
C (-4
F–149
F)
EMC Certifications:
Class B FCC / CE / VCCI /
Safety:
UL
MTBF*:
> 150,000 hours
9.3.2 M40GSSBP and : LED and Connector Specifications
LEDs:
Green LED per port (Network / Monitor)
Activity : LED will blink.
Link : LED will turn on.
Two LED:
Inline Mode – Green LED.
Non Inline Mode :Bypass, TAP, Disconnect – Yellow (Orange) LED.
HB Status LED
Blinking Green LED – HB is active.
LED is off – HB not active.
Connecto
rs:
Network: 2 LC
Monitor: 2 QSFP+
