Part # 4526026 Rev. 03 (06/12/14)
Page 9
INSTALLATION Continued
The gas supply of the range mounted salamanders may be inter-connected with the supply of the range, so both units
are supplied from a single gas connection. The supply gas piping should be a minimum of 1” (25mm) diameter to ensure
enough gas capacity is available at the specifi ed pressure to supply the total combined input rating of both appliances. The
components comprising the optional inter-connect kit are shown below.
Optional Interconnect Gas Kit #4531606 - Version 1, Connecting to a 36in Range
MARK HOLE LOCATIONS AND MOUNT
SUPPORT BRACKET (ITEM 6 - 2640700) TO RANGE
BACK WITH (2)#10-16 TEKS SELF-DRILL/TAP
SCREWS (ITEM 11 - F67 - NOT SHOWN) PROVIDED.
ATTACH SUPPORT CLAMP (ITEM 7 - 2640800)
TO SUPPORT BRACKET ( ITEM 6 - 2640700)
WITH (2)#10-24 SELF-TAPPING SCREWS (ITEM 12
F32 - NOT SHOWN) PROVIDED.
15
5
2
9
1
4
10
14
3
8
13
REGULATOR - 4.5" w.c. NATURAL GAS
OR 10.0" w.c. PROPANE GAS
(SUPPLIED WITH RANGE)
REGULATOR - 6.0"w.c. NATURAL GAS
OR 10.0"w.c. PROPANE GAS
(SUPPLIED WITH SALAMANDER/
CHEESEMELTER)
TO INLET OF SALAMANDER/
CHEESEMELTER MANIFOLD
2
2
3
SUPPLIED WITH RANGE
SUPPLIED WITH RANGE
5
CUT TUBING (ITEM 15 - 4531608) TO SIZE AS REQUIRED
TO SUIT SALAMANDER/CHEESEMELTER TOP OR REAR
MANIFOLD INLET CONNECTION
6
7
TO INLET OF RANGE
MANIFOLD
1" NPT GAS SUPPLY
CONNECTION
ITEM
DESCRIPTION
QUANTITY 36”
1
4.5” W.C 3/4”NPT, Regulator Natural Gas, supplied with Range
1
3/4” ISO 7-1, Regulator Natural Gas, supplied with Range
1
10” W.C 3/4”NPT, Regulator Propane Gas, supplied with Range
1
3/4” ISO 7-1, Regulator Propane Gas, supplied with Range
1
2
Nipple, 3/4” NPT x 1/2” (one supplied with range)
3
3
Elbow, 90deg, 3/4” NPT (one supplied with range)
2
4
Union, 3/4” NPT
2
5
3/4”CC x 3/4” NPT Straight Fitting
2
6
Bracket, Pipe Support
1
7
Clamp, Pipe Support Bracket
1
8
Reducing Elbow, 90deg, 3/4” NPT x 1/2” NPT
1
9
Nipple, 3/4” NPT x 6.5”
1
10
Reducing Tee, 3/4” NPT x 3/4” NPT x 1”
1
11
Screw, #10-16 x 1/2” Hex, Washer Head, Teks Self-Drill/Tap (not shown)
2
12
Screw, #10-24 x 1/2” Pan Head, Self-Tap, Type F (not shown)
2
13
6” W.C 3/4” NPT, Regulator Natural Gas, supplied with Salamander/Cheesemelter
1
10” W.C 3/4” NPT, Regulator Propane Gas, supplied with Salamander/Cheesemelter
1
14
Nipple, 3/4” NPT x 3.5”
1
15
Tubing 3/4”
1
Optional Inter-Connect Kit
(Models GFIR36, GFIR48 & GFIR60)
Summary of Contents for GF Sentry Series
Page 55: ...Parte 4526026 rev 03 06 12 14 P gina 55...
Page 56: ......