Part Number 4532292 Rev 3 12/15 17
Section 2
Installation
ADJUSTING AND LOCKING THE FEET
STAINLESS STEEL LEGS
The RTCSmp SH/DU/GR NSF compliant models (USA/
Canada) come with stainless steel legs that have a height
adjustable range of 1-inch or 2.54cm.
M8 THREAD
Ø 41.05 [1.616]
Ø 32.16 [1.266]
Ø 47.12 [1.855]
2.49 [0.098]
127.0 [5.0] minimum
152.4 [6.0] maximum
Adjust the height of the leg by turning the bottom part as
shown:
M8 THREAD
Ø 41.05 [1.616]
Ø 32.16 [1.266]
Ø 47.12 [1.855]
2.49 [0.098]
127.0 [5.0] minimum
152.4 [6.0] maximum
The feet on the appliance are height-adjustable and
lockable.
Optional. To prevent the appliance from slipping, Tabletop
Self-Adhesive Foot Pads can be purchased for the feet.
Insert the feet into the Foot Pads and the feet can then be
affixed to the surface of the counter or table.
1
2
3
1. Foot Complete Assembly, part number 95000120
2. Tabletop Self-Adhesive Foot Pad, part number 72264020 (set of
four).
3. Foot and non-slip pad assembled.
To adjust the height of the appliance:
1. Rotate the feet counter-
clockwise to lower the
appliance. Or rotate the
feet clockwise to raise the
appliance.
2. To lock the feet into
position, rotate the locks
counter-clockwise until
the locks are tightened
against the bottom of the
appliance.
3. The feet are locked.
NOTE Ensure the appliance
is level.
Summary of Contents for GI-SH/DU/GR 10000
Page 31: ......
