10
Part Number 4532292 Rev 3 12/15
Installation
Section 2
INSTALLATION SAFETY—ELECTRICAL
DANGER
All electrical connections must be carried out by a
certified electrical contractor, who is responsible for
the correct rating and installation of the appliance. The
contractor has to comply with all legal safety regulations
and all applicable national and local electrical codes.
n
Warning
Markings and warning labels mounted directly on the
equipment must be observed at all times and kept in a
fully legible condition.
n
Warning
This equipment must be positioned so that the plug is
accessible unless other means for disconnection from
the power supply, such as circuit breaker or disconnect
switch, is provided.
n
Warning
CE Induction Appliance only
: If ground fault current
protective switches are used, they must be provided
with selective activation and designed for a minimum
fault current of 30mA.
Notice
Ensure the supply voltage and the line current match
the specifications given on the serial plate affixed to the
appliance. Wrong voltage will damage the appliance. A
stable power supply must be provided.
Notice
Always refer to the serial plate on the appliance to verify
the electrical data. When the data listed on the serial
plate is different than that listed in this manual, contact
the manufacturer or the authorized representative.
Notice
All cables must be routed, protected and tension free.
PERSONAL PROTECTION
DANGER
All utilities (gas, electric, water and steam) must be
OFF to all equipment and locked out of operation
according to national/regional, as well as company
approved practices during installation, maintenance
and servicing. Always allow appliance to cool.
DANGER
Use appropriate safety equipment during installation,
maintenance and servicing.
DANGER
Never stand, sit, or lean on the equipment! They are
not designed to hold the weight of an adult, and may
collapse or tip if misused in this manner.
DANGER
To avoid cardiac pacemaker malfunction, consult your
physician or pacemaker manufacture about effects of
electromagnetic field on your pacemaker.
n
Warning
Markings and warning labels mounted directly on the
equipment must be observed at all times and kept in a
fully legible condition.
n
Warning
Risk of burns from high temperatures. You may get burnt
if you touch any of the parts during operation. Surfaces
close to the cooking area including side panels may get
hot enough to burn skin. Use extreme caution to avoid
coming in contact with hot surfaces or hot grease. Wear
personal protective equipment.
,
Caution
Use caution when handling metal surface edges of all
equipment.
Summary of Contents for GI-SH/GR 3500
Page 31: ......
