background image

Part # 4520897 (01/31/08)

Page 12

TROUBLE SHOOTING Continued

Troubling Shooting Guide

Fault

Possible Cause

Action to take through operator or 

operating personnel

No heating indicator operation is OFF 

(dark)

No electrical supply

Check if the electrical supply (cable 

plugged in the wall socket), check 

preliminary fuses

Control in off-position

Push control on

Pan too small (bottom diameter less 

than 5” (127 mm )

Use a suitable pan

Pan is not placed in the center of the 

heating area (the cooker can’t detect 

the pan)

Move the pan to the center of the 

heating area

Unsuitable pan

Choose a pan which is recommended 

for induction cooking *

Cooker defective

Ask your supplier for repair service, 

unplug the cooker from the electrical 

supply

Poor heating, indicator operation is ON 

(shines)

Used pan is not ideal

Use a pan which is recommended for 

induction cooking, compare results 

with ‘your’ pan

Air-cooling system obstructed

Verify, that air inlet and air outlet are 

not obstructed with objects

Ambient temperature is too high (the 

cooling system is not able to keep the 

cooker in normal operating conditions 

**

Verify, that no hot air is sucked in by the 

fan. Reduce the ambient temperature. 

The air inlet temperature must be lower 

than 40ºC/110ºF

One phase is missing (only with three 

phase supply)

Check preliminary fuses

Cooker defective

Ask your supplier for repair service, 

unplug the cooker from the electrical 

supply

No reaction to control knob positions

Control knob defective

Ask your supplier for repair service, 

unplug the cooker from the electrical 

supply

Heating cycle switches off and on 

within minutes, fan is active

Air inlet or outlet obstructed

Remove objects from air inlet and air 

outlet slots, clean the slots

Grease filter is dirty

Clean grease filter

Heating switches off and on within 

minutes, fan is never active

Fan defective

Ask your supplier for repair service

Fan control defective

Summary of Contents for GMIU3.5

















Reviews: