Installation
RTCSmp
Built-In
Temperature Controlled Hold-Line
Part # 4532286 Rev 3 (6/10/14)
11
4.5
Dimensions and Installation
4.5.1
Heat Retaining Plate Installation
The Heat Retaining Plate is to be flush-mounted. A support frame or support structure has to be custom designed
and built for housing the retaining plate(s).
4.5.1.1
Dimensions: RTCSmp HOIN450/900/1350/1800 Heat Retaining Plate
(measurements in mm and [inch])
4.5.1.2
Cut-Out Dimensions
Please review carefully the dimensions in section
4.5.1.1
.
Refer to
Detail A
in section
4.5.1.1
:
A.
Cut-out dimension on the counter surface: 330 x 330mm [12.99” x 12.99”].
NOTE
:
Dimensions include widths for silicone joints on all four (4) sides.
Consider adjusting cutout dimensions based on mounting methods, see 4.5.1.3.
B.
Recommended recess depth: minimum 8.00 to 8.64mm [0.315”to 0.34”].
C.
Body Clearance (width x depth x height): 300 x 300 x 100mm / 11.81” x 11.81” x 3.94”.
A
A
B
C
A
FRONT
