Accessing the Garland Technology Modular Chassis with Filtering Backplane:
Connect to the RJ-45 Management port using the supplied cable. You will need a serial
terminal emulator like PuTTY using the settings listed below:
User Name:
admin
User Password:
gtadmin1
Bits per second:
115200
Data Bits:
8
Parity:
None
Stop Bits:
1
Flow Control:
None
Page 3
Page 3
V
Veerr 1
1..5
6
Main Menu
M1G2ACE/M1G2DCE
M1G1ACE/M1G1DCE
M1G2ACE/M1G2DCE
M1G1ACE/M1G1DCE
The Main Menu provides access to the five main areas that can be controlled on the M1GXXCE chassis.
Option 1
gives you access to configuring the individual modules.
Option 2
provides access to set up Filtering of each module to the backplane
Option 3
provides the capability to manage the Username and Password for the chassis.
Option 4
provides the capability to manage the Network configuration
Option 5
provides the capability to upgrade the soft
Option 0
allows you to Log Out
Figure 3: Main Menu
Garland Technology M1G1ACE (Code Version: 1.0.21)
Main Menu
Select:
1. Change/View Module Configuration
2. Filtering
3. Change Username/Password
4. Settings
5. Upgrade
0. Logout
Once you login the above screen will be presented. This is where you will set up the chassis
so that you can manage it through the Ethernet Network Management port.
Press
on the Main Menu to open the Settings menu.
Garland Technology M1G1ACE (Code Version: 1.0.21)
Settings Menu
1. NetworkConfig
2. Key Press Timeout
0. Exit
Select:
Figure 4: Settings Menu
Press
to get to the Network Configuration Menu
