INSTALLATION/OPERATION MANUAL
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
PART #4521777 (08/18/09)
Page 24
The platen will lower, and recognize the product that
has been loaded on the grill.
5. Alarm will sound when the cook cycle is complete.
6. Remove product and clean grill to prepare for the next
cook cycle.
LUNCH IN AUTO MODE
Note:
Switching from Breakfast to Lunch menu items will
take approximately 10 minutes to heat to the appropriate
temperatures.
1. Select PM mode. Press and hold the
button.
2. Select Auto mode. Press and hold the
button. The
control will display “PM / AUTOMATIC.”
3. Following the lay patterns shown on the following
page, load product on the grill.
OPERATING PROCEDURES
(continued)
4. Press
the GREEN pushbutton to initiate a cook cycle.
The platen will lower, and recognize the product that
has been loaded on the grill.
5. Alarm will sound when the cook cycle is complete
6. Remove product and clean grill to prepare for next
cook cycle.
TRANSITION COOKING
Approximately 30 minutes before changing to the lunch
menu, perform the following:
1. PRESS the
button (to display the upper platen
temperature).
2. Press the
button.
3. The upper platen indicator will light (AMBER) and
maintain the normal operating (set) temperature.
PRODUCT RECOGNITION
This Garland Clamshell grill is equipped with Product Recognition Controls (PRC). This new technology allows the user to
simply start a cook cycle WITHOUT having to select a specifi c menu item. The PRC will recognize the product thickness
by utilizing switches inside the upper platen and the magnets mounted on the platen arms. Once the PRC calculates
the thickness of the product that’s been loaded, it will look up product from the product range library (below), and
automatically select that product.
MENU ITEM
MIN GAP
MAX GAP
Breakfast Library Recommended Ranges
Strip Bacon
.010
.130
Sausage Clam
.210
.405
Steak Clam
.430
.480
MENU ITEM
MIN GAP
MAX GAP
Lunch Library Recommended Ranges
10:1 Clam
.160
.345
4:1 Clam
.365
.560
Strip Bacon
.001
.130
While cooking in Automatic Mode, the platen will lower and rest on the top of the product. The platen arms will continue
to move in a downward motion performing various calculations to measure the thickness of the product that has been
placed. In the event “
Product Not Recognized
” or the wrong product is recognized, perform an Auto Forced Calibration.
Performing an Auto Force Calibration will reset the platen to the grill surface.
TO PERFORM AUTO FORCED CALIBRATION
1. PRESS and HOLD the
and
buttons together. The control will display AUTO FORCE CAL - NO.
2. PRESS
the button. The “NO” will begin to fl ash.
3. PRESS
the button. The fl ashing “NO” will change to fl ashing “YES”.
4. PRESS
the button.
The upper platen will immediately begin to lower and perform an auto calibration routine
.
Summary of Contents for MWE3S
Page 2: ......
