1. ENTER:
1. ENT ER:
● In "stop" mode, press ENTER button to enter into program selection and
setting value which flash in related window.
A: When you choose the program, press Enter to confirm the one you like.
B: When in setting, press ENTER to confirm the value that you would like to
preset.
● During the start mode, press ENTER to choose display the speed or RPM,
or switch automatically.
2. START /STOP:
● Press START/STOP button to start or stop the programs.
● During any mode, hold down this button for 2 seconds to totally reset the
computer.
3. UP:
● In stop mode and the dot matrix character flash, press this button to select
the program up. If the related window value flash, press this button to
increase the value.
● During the start mode, press this button to increase the training
resistance.
4. DOW N:
● In stop mode and the dot matrix character flash, press this button to
select the program down. If the related window value flash, press this button to
decrease the value.
● During the start mode, press this button to decrease the training
resistance.
5. RECOVERY:
● First test your current heart rate and show your heart rate value, press
this button to enter into pulse recovery testing.
● When you are in pulse recovery mode, press this button to exit.
NOTE:
①
To press or rotate of UP, DOWN button should be followe d by
different model.
②
It is suggested to cover your finger within the marked region to
select functions in case of any wrong action.
1. Turn on the computer
Plug in one end of the adaptor to the AC electrical source and connect the
other end to the computer.
The computer will beep and enter into initial mode.
2. Program select and value setting
●
Manual Program and Preset Program P1
～
P10
A. Press UP, DOWN bu tton to select the program that you like.
