background image

 

23 

 

4.2.15  Sensor Status Information (PGRMT) 

The Garmin Proprietary sentence $PGRMT gives information concerning the status of the GPS 

sensor. This sentence is transmitted once per minute regardless of the selected baud rate. 
$PGRMT,<1>,<2>,<3>,<4>,<5>,<6>,<7>,<8>,<9>*hh<CR><LF> 

<1>  Product, model and software version (variable length field, for example, “GPS 15xH/15xL 

VER 2.05”) 

<2>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<3>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<4>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<5>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<6>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<7>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<8>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<9>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

4.2.16  3D Velocity Information (PGRMV) 

$PGRMV,<1>,<2>,<3>*hh<CR><LF> 

<1>  True east velocity, -514.4 to 514.4 meters/second 
<2>  True north velocity, -514.4 to 514.4 meters/second 
<3>  Up velocity, -999.9 to 999.9 meters/second 

4.2.17  DGPS Beacon Information (PGRMB) 

$PGRMB,<1>,<2>,<3>,<4>,<5>,K,<6>,<7>,<8>*hh<CR><LF> 

<1>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<2>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<3>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<4>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<5>  Distance to beacon reference station in kilometers 
<6>  No Effect (This field is not used on the GPS 15xH/15xL and is included only for compatibility 

with other models.) 

<7>  DGPS fix source: R = RTCM, W = WAAS, N = No DGPS fix available 
<8>  Currently selected DGPS mode as specified by the PGRMC1 sentence of Section 4.1.4: A = 

Automatic (factory default), W = WAAS only, R = RTCM only, N = None (No DGPS enabled) 

 

Summary of Contents for 15 H Series









































Reviews: