background image

Fishfinder 350C Owner’s Manual

Zooming Automatically

When you zoom in one sonar view, the other sonar views are not affected.

Press 

SPAN

 twice.

TIP

: You can also select 

Menu

 > 

Zoom

Select 

Auto Zoom

.

Locking the Sonar View to the Water Bottom

When you set the zoom to bottom lock in one sonar view, that setting does not 

affect the other views.

Press 

SPAN

 and 

DEPTH

 at the same time.

TIP

: You can also select 

Menu

 > 

Zoom

 > 

Bottom Lock

Select a span.
For example, if you select a span of 20 meters, the device shows an area from 

the bottom to 20 meters above the bottom.

Showing and Adjusting the Depth Line

You can show and adjust a horizontal line on a sonar view. The depth of the line is 

indicated on the right side of the screen.
When you show a depth line in one sonar view, the line is also shown on the other 

sonar views.

Select 

MENU

 > 

Depth Line

 > 

On

.

To adjust the depth line, select   or  .

Pausing the Sonar View

Select 

MENU

 > 

Pause/Rewind Sonar

.

Viewing the Sonar History

Select 

MENU

 > 

Pause/Rewind Sonar

.

Select an option:
•  To scroll the sonar view and move the vertical line, select   or  .
•  To adjust the horizontal depth line, select   or  .

Resuming the Sonar View

After pausing the sonar view or viewing the sonar history, select 

MENU

 > 

Resume Sonar

.

Additional Device Settings

Alarms

Select 

MENU

 > 

Setup

 > 

Alarms

.

Shallow Water

: Sets an alarm to sound when the vessel enters water that is more 

shallow than the depth entered.

Deep Water

: Sets an alarm to sound when the vessel enters water that is deeper 

than the depth entered.

Battery

: Sets an alarm to sound when the battery voltage is below the voltage 

entered.

Fish

: Sets an alarm to sound when the device detects a suspended target.

• 

 sets an alarm to sound for all fish sizes.

• 

 sets an alarm to sound for medium and large fish only.

• 

 sets an alarm to sound for large fish only.

Water Temp

: Sets an alarm to sound when the water temperature varies more than 

± 2°F (±.1.1°C) from the entered temperature.

NOTE

: The device must be connected to a temperature-capable transducer to 

show the water temperature. 

190-01440-00_0B.indd   6

3/21/2012   1:00:08 PM

Summary of Contents for 350C













Reviews: