Garmin 400W Series, Pilot'S Manual Addendum

6

190-00356-31  Rev. C

The strike data display phases are:

1.   Lightning Symbol (latest strikes; less than one 

minute; a black guard band is placed around 
the strike symbol during the first six seconds 
of display). 

2.  Large Plus “+” sign (more than one minute 

old). 

3.   Small Plus “+” sign (more than two minutes 

old). 

4.   Strike Data is no longer displayed (after three 

minutes). 

To configure storm data on the Map Page:

1.  From  the  default  Nav  Page,  turn  the 

small 

right 

knob to select the Map Page. 

2.  Press 

MENU

 to display the Page Menu

.

3.  Turn  the 

small  right 

knob  to  select ‘Setup 

Map?’ and press 

ENT

. 

4.  The flashing cursor highlights the GROUP field.  

Turn the 

small right 

knob to display the Map 

Setup  Options  Menu. Turn  the 

small  right 

knob to select “Weather” and press 

ENT

. 

5.  The  flashing  cursor  highlights “Weather”  in 

the GROUP field. Turn the 

large right 

knob to 

select the desired lighting mode field. Turn the 

small right 

knob to select the desired mode 

and press 

ENT

. Repeat for the remaining fields 

and options. 

6.  Return to the Map Page by pressing 

CLR.

NOTE: 

Only the data that is viewable on the screen is 

included in the strike rate. Therefore, you can zoom in 
and see what the strike rate is locally, or you can zoom 
out for a bigger picture.  
 
Also, when panning with the cursor on the Map Page, 
you can zoom in and isolate individual cells. Please 
note, however, that strike data is not typically updated 
on the Map Page while the panning cursor is on. 
Therefore, when the panned map is first displayed, the 
data is only a “snapshot” of conditions (as mentioned 
above, the strike rate will reflect viewable data only). 

Section 2

L-3 Stormscope Interface