GARMIN
Ltd. or its subsidiaries
c/o Garmin
International
1200 E. 151" Street, Olathe,
KS 66062 USA
ROTORCRAFT
FLIGHT
MANUAL
SUPPLEMENT
GARMIN
400W SERIES GPS-WAAS
NAVIGATION
SYSTEM
Bell 206B
Section
3. NORMAL
PROCEDURES
Refer to the 400W Series unit Pilot's
Guide defined
in paragraph
1.1 of this document
for
nonnal
operating
procedures.
This includes all GPS operations,
VHF COM and NAY,
and Multi-Function
Display information.
Although
intuitive and user friendly the 400W Series unit requires
a reasonable
degree of
familiarity
to enable unit operations
without becoming
too engrossed
at the expense of
basic see-and-avoid.
Pilot workload
will be higher for pilots with limited familiarity
in
using the unit.
Gannin
provides
training tools with the Pilot's
Guide and PC based
simulator.
Pilots should take full advantage
of these training tools to enhance
system
familiarization.
3.1
Approaches with Vertical Guidance
The 400W Series unit supports
three types ofGPS
approaches
with vertical guidance:
LPV approaches,
LNAVNNAV
(annunciated
as LNNAV)
approaches,
and LNA V
approaches
with advisory
vertical guidance
(annunciated
as LNA V+V). For LNA V
approaches
with advisory
vertical guidance,
the 400W Series will annunciate
LNA V+V
indicating
vertical guidance
is available.
LNA V minimums
will be controlling
in this
case.
3.2
"'FDE Prediction Program
The Gannin
WAAS Fault Detection
and Exclusion
(WFDE)
Prediction
Program
is
required
for Remote/Oceanic
operations.
The Prediction
Program
should be used in
conjunction
with the Gannin
400W/500W
Simulator.
After entering
the intended
route
of flight in the Simulator
flight plan the pilot selects the FDE Prediction
Program
under
the Options
menu of the Simulator
program.
For detailed
infonnation
refer to the WFDE prediction
program
instructions
(190-00643-01).
The availability
of FOE is only required
for Oceanic
or Remote
operations.
FAA APPROVED
190-01226-06
Rev. I
Page 9 of 14
DATE:
SEP 27 2010
------