Creating a Waypoint Using the Map
You can quickly create a waypoint using the Map
page. When you pan the map and move the arrow
over a map item (see page 50), a highlighted descrip-
tion of that item appears. The 76CS Plus uses the item
text shown as the default name for the new waypoint.
To create a new waypoint using the map:
1. Press
PAGE
or
QUIT
until the Map page is
displayed.
2. Use the
Rocker
key to move the arrow to the
desired map position or map feature.
3. Press and quickly release
ENTER/MARK
to capture the arrow position. Pressing and
holding
ENTER/MARK
marks your present
position, not the arrow’s location.
4. If the location you selected has more than
one point at it, a Select Point window appears
listing different points and charts. Select the
desired point from the list and press
ENTER
.
5. If you selected a map feature, an information
page appears. Use the
Rocker
key to highlight
Save
and press
ENTER
.
Map Feature Information Page
Select
Save
to save the feature as a waypoint.
6. The Waypoint page appears. To accept the
waypoint with the default information, highlight
OK
and press
ENTER
.
7. To change the information on the Waypoint
page, highlight the appropriate field and press
ENTER
. After making changes, highlight
OK
and press
ENTER
.
76CS Plus Owner’s Manual
25
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
W
AYPOINTS
190-00507-00_0A.indd 25
2/14/2005 3:33:22 PM