Project Waypoint Page
Enter the distance, bearing, and units to project
the new waypoint.
Bearing
Distance
Units
5. To change the units of measure, highlight
nm
and press
ENTER
. Highlight the desired units
in the list and press
ENTER
.
6. Make any other desired changes to the
new waypoint data (such as the name or
symbol), then press
QUIT
or
PAGE
to exit the
information page.
Deleting Waypoints
You can delete individual waypoints or all waypoints
that have a particular symbol.
NOTE:
Once a waypoint is deleted, it cannot
be recovered from the unit. Back up important
waypoints to a computer using the optional
PC cable and interface software, such as
MapSource, or write them down by hand.
To delete a waypoint:
1. Open the waypoint’s information page.
2. Highlight
Delete
and press
ENTER
.
To delete waypoints by symbol:
1. Open the Waypoints find category and press
MENU
.
2. Highlight
Delete…
and press
ENTER
.
3. Highlight the symbol of the waypoint you want
to delete and press
ENTER
.
4. Highlight
Yes
and press
ENTER
to confirm.
Choose
No
or press
QUIT
to exit without
deleting.
76CS Plus Owner’s Manual
29
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
W
AYPOINTS
190-00507-00_0A.indd 29
2/14/2005 3:33:23 PM