To set speed and fuel flow (plan your
route):
1. Press
MENU
twice to open the Main Menu.
2. Highlight
Routes
and press
ENTER
to open
the list of saved routes.
3. Highlight the desired route and press
ENTER
to open the Route Review page.
4. Press
MENU
. Highlight
Set Speed and Fuel
and press
ENTER
. The following window
appears:
5. Enter the data for Speed and Fuel Flow.
6. Press
QUIT
when you are done.
NOTE:
Fuel flow rates are measured in “units
per hour.” System setting changes for units of
measure (statute, nautical, or metric) do not
affect the fuel flow measure. You should enter
fuel flow rates based upon information for
your vessel (such as the operator’s manual or
performance specifications) and make note of the
desired units of measure (gallons or liters).
To set up route leg transition:
1. Press
MENU
twice to open the Main Menu.
2. Highlight
Routes
and press
ENTER
.
3. Press
MENU
, highlight
Set Up Routes
, and
press
ENTER
.
4. Highlight the top field and press
ENTER
.
Select
Manual
or
Distance
and press
ENTER
.
5. If you select
Distance
, highlight the
Radius
field and press
ENTER
. Use the
Rocker
key
to enter the distance. When you are within the
entered distance, the 76CS Plus will direct you
to the next point on your route.
6. If you select
Manual
, use the
IN
and
OUT
keys to transition to the next waypoint while
navigating a route.
36
76CS Plus Owner’s Manual
B
ASIC
O
PERATION
>
C
REATING
AND
U
SING
R
OUTES
190-00507-00_0A.indd 36
2/14/2005 3:33:27 PM
