Navigating in the Sea Modes
Once you are actively navigating, you will see a ma-
genta line that runs from your current location to the
destination on the Map page. You can use many pages
in the 76CS Plus to navigate to your destination, such
as the Map, Compass, and Highway pages.
Man OverBoard (MOB)
The Man OverBoard function (MOB) lets you simul-
taneously mark your present position and create a
direct route back to that position for quick response in
emergency situations.
To activate the MOB function:
1. Press and hold the
NAV/MOB
key, or press
the
NAV/MOB
key twice.
2. Press
ENTER
to confirm and begin navigating
to the MOB position.
Once an MOB has been activated, an MOB waypoint
with an international MOB symbol is created, and
the unit begins actively navigating to that point. The
MOB waypoint is stored in the waypoint list and may
be deleted like any other waypoint.
Editing Your Route
You can edit your Powerboat, Sailboat, or Off Road
route on the map while you are navigating.
To edit the route on the map:
1. Press
NAV
while you are navigating a route.
2. Highlight
Edit Navigation
and press
ENTER
.
3. Use the
Rocker
key to
select the route and press
ENTER
.
4. Drag the route to the new
location as shown to the
right. Press
ENTER
.
5. If the Mark Waypoint page
opens, edit the waypoint
as desired, highlight
OK
, and press
ENTER
.
Highlight the waypoint
you just made on the map
and press
ENTER
to add it to your route.
6. Repeat steps 3 through 5 until all desired
points are added to the route. Press
QUIT
or
PAGE
when finished.
Editing the route
on the map
76CS Plus Owner’s Manual
43
N
AVIGATING
IN
THE
S
EA
AND
L
AND
M
ODES
>
N
AVIGATING
IN
THE
S
EA
M
ODES
190-00507-00_0A.indd 43
2/14/2005 3:33:30 PM