Changing the Map Detail
You can adjust the detail of the Map page while you
are in Powerboat mode or Sailboat mode.
To change the map detail shown on the
Map page:
1. From the Map page, press
MENU
to open the
options menu.
2. Use the
Rocker
key to highlight
Change Map
Detail
and press
ENTER
.
3. Use the
Rocker
key to adjust the slider; move
the slider right to increase the detail shown on
the Map page, or move it left to decrease the
detail.
4. Press
ENTER
or
QUIT
to close the Map Detail
window.
While in any mode, you can declutter the map display.
Press
MENU
, select
Declutter
, and press
ENTER
.
Or simply, press
ENTER
when nothing on the map is
selected. “Declutter” appears below the map scale.
Measuring Distance
You can measure the distance and bearing between
two map items.
To measure bearing/distance:
1. From the Map page, press
MENU
to open the
options menu.
2. Highlight
Measure Distance
and press
ENTER
. An on-screen arrow appears on the
map display at your present position with
REF
below it.
3. Move the arrow to the desired starting point
and press
ENTER
. A push-pin marks the point.
Measure Distance
End point of
measurement,
labeled “REF”
Push pin
indicating
the beginning
point of the
measurement
Bearing and
distance from
the push pin to
the REF arrow.
4. Move the arrow to the point you want to
measure to. The bearing and distance are
displayed.
5. Press
QUIT
when you are finished.
76CS Plus Owner’s Manual
51
M
AIN
P
AGES
>
M
AP
P
AGE
190-00507-00_0A.indd 51
2/14/2005 3:33:34 PM