Caring for Your 76CS Plus
The 76CS Plus is constructed of high quality materi-
als and does not require any service or maintenance
other than cleaning.
Cleaning the Unit
Clean the unit using a cloth dampened with a mild
detergent solution and then wipe dry. Avoid chemical
cleaners and solvents that may damage plastic com-
ponents.
Storing the 76CS Plus
Do not store the 76CS Plus where prolonged exposure
to temperature extremes may occur (such as in the
trunk of a car) as permanent damage may result. User
information, such as waypoints and routes, is retained
in the unit’s memory without the need for external
power. It is always a good practice to back up impor-
tant user data by manually recording it or download-
ing it to a PC (transferring it to MapSource).
Immersing the Unit in Water
The 76CS Plus is waterproof to IEC Standard 60529
IPX7. It can withstand immersion in 1 meter of water
for 30 minutes. Prolonged submersion can cause dam-
age to the unit. After submersion, be certain to wipe
and air dry the unit before reuse or charging.
Support and Repairs
To resolve problems that cannot be remedied us-
ing this guide, contact Garmin Product Support in
the U.S.A. at 800/800.1020 or Garmin Europe at
44/0870.8501241.
The 76CS Plus has no user-serviceable parts. Should
you ever encounter a problem with your unit, please
take it to an authorized Garmin dealer for repairs.
The 76CS Plus is fastened shut with screws. Any at-
tempt to open the case to change or modify the unit
in any way will void your warranty and may result in
permanent damage to the equipment.
To read the Warranty, refer to page 103.
vi
76CS Plus Owner’s Manual
I
NTRODUCTION
>
C
ARING
FOR
Y
OUR
76CS P
LUS
190-00507-00_0A.indd 6
2/14/2005 3:33:08 PM