background image

System Settings

Select 

 > 

Settings

 > 

System

.

• Display Settings (

Display Settings

, page 18

)

• Data Recording Settings (

Data Recording Settings

page 18

)

• Unit Settings (

Changing the Units of Measure

, page 18

)

• Tone Settings (

Turning the Device Tones On and Off

page 18

)

• Language Settings (

Changing the Device Language

page 18

)

Display Settings

Select 

 > 

Settings

 > 

System

 > 

Display

.

Brightness

: Sets the backlight brightness.

Backlight Timeout

: Sets the length of time before the backlight 

turns off.

Color Mode

: Sets the device to display day or night colors. You 

can select the Auto option to allow the device to set day or 

night colors automatically based on the time of day.

Screen Capture

: Allows you to save the image of the device 

screen.

Data Recording Settings

Select 

 > 

Settings

 > 

System

 > 

Data Recording

.

Recording Interval

: Controls how the device records activity 

data. The Smart option records key points where you change 

direction, speed, or heart rate. The 1 Sec option records 

points every second. It creates a very detailed record of your 

activity and increases the size of the stored activity file.

Cadence Averaging

: Controls whether the device includes zero 

values for cadence data that occur when you are not 

pedaling (

Data Averaging for Cadence or Power

, page 12

).

Power Averaging

: Controls whether the device includes zero 

values for power data that occur when you are not pedaling 

(

Data Averaging for Cadence or Power

, page 12

).

Changing the Units of Measure

You can customize units of measure for distance and speed, 

elevation, temperature, weight, position format, and time format.

1

Select 

 > 

Settings

 > 

System

 > 

Units

.

2

Select a measurement type.

3

Select a unit of measure for the setting.

Turning the Device Tones On and Off

Select 

 > 

Settings

 > 

System

 > 

Tones

.

Changing the Device Language

Select 

 > 

Settings

 > 

System

 > 

Language

.

Changing the Configuration Settings

You can modify all of the settings you configured in the initial 

setup.

1

Select 

 > 

Settings

 > 

System

 > 

Device Reset

 > 

Initial 

Setup

.

2

Follow the on-screen instructions.

Time Zones

Each time you turn on the device and acquire satellites or sync 

with your smartphone, the device automatically detects your 

time zone and the current time of day.

Device Information

Specifications

Edge Specifications

Battery type

Rechargeable, built-in lithium-ion battery

Battery life

12 hr., typical usage

Operating temperature 
range

From -20º to 60ºC (from -4º to 140ºF)

Charging temperature 
range

From 0º to 45ºC (from 32º to 113ºF)

Radio frequency/
protocol

2.4 GHz ANT+ wireless communications 
protocol
Bluetooth Smart wireless technology
Wi

Fi wireless technology

Water rating

IEC 60529 IPX7*

*The device withstands incidental exposure to water of up to 1 m 

for up to 30 min. For more information, go to 

www.garmin.com

/waterrating

.

Heart Rate Monitor Specifications

Battery type

User-replaceable CR2032, 3 volts

Battery life

Up to 4.5 yr. at 1 hr./day

Water resistance

3 ATM*

NOTE: 

This product does not transmit heart 

rate data while swimming.

Operating temperature 
range

From -5° to 50°C (from 23° to 122°F)

Radio frequency/
protocol

2.4 GHz ANT+ wireless communications 
protocol

*The device withstands pressure equivalent to a depth of 30 m. 

For more information, go to 

www.garmin.com/waterrating

.

Speed Sensor and Cadence Sensor Specifications

Battery type

User-replaceable CR2032, 3 volts

Battery life

Approximately 12 months (1 hour per day)

Operating temperature 
range

From -20º to 60ºC (from -4º to 140ºF)

Radio frequency/protocol 2.4 GHz ANT+ wireless communications 

protocol

Water rating

1 ATM*

*The device withstands pressure equivalent to a depth of 10 m. 

For more information, go to 

www.garmin.com/waterrating

.

Device Care

NOTICE

Do not store the device where prolonged exposure to extreme 

temperatures can occur, because it can cause permanent 

damage.
Never use a hard or sharp object to operate the touchscreen, or 

damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can 

damage plastic components and finishes.
Secure the weather cap tightly to prevent damage to the USB 

port.

Cleaning the Device

1

Wipe the device using a cloth dampened with a mild 

detergent solution.

2

Wipe it dry.

After cleaning, allow the device to dry completely.

18

Device Information

Summary of Contents for A03001































Reviews: