c320 Owner’s Manual
23
A
PPENDIX
Mounting Your c320
Use the enclosed disk to mount your unit to the dashboard.
California drivers, use the enclosed disk to comply with California
regulations. See page 33 for more information.
To mount the disk:
1. Clean and dry the area on your
dashboard where the disk is to
be placed.
2. Remove the backing from the
permanent mounting adhesive on
the bottom of the disk and place
the disk on the dashboard.
3. Place the c320 (still mounted to
the suction cup mount) on top
of the disk. Secure the suction
cup mount to the disk, following
the instructions included in your
Setup Guide
.
Important:
The
permanent
mounting adhesive is extremely
difficult to remove after it is installed.
Safely mount your unit. See page
for warnings.
Adjusting the Backlight Brightness
Touch the brightness icon to access the
Set Brightness
page.
You can adjust brightness levels of the backlight by touching the
light bulb icons shown above. Touch - to dim the backlight or + to
increase the brightness. When you are finished, select
OK
.
Disk
Suction cup
mount
