aera 500 Series Owner’s Manual
Appendix
Changing the Fuse
CaUTiON:
When replacing the fuse, do
not lose any of the small pieces, and ensure
they are put back in the proper place.
If your unit does not charge in your vehicle,
you may need to replace the fuse located at
the tip of the automotive adapter.
1. Unscrew the round end piece, and
remove it.
2. Remove the fuse (glass
and silver cylinder), and
replace with a 3A fast‑
blow fuse.
3. Ensure that the silver
tip is placed in the end
piece. Screw on the end
piece.
About GPS Satellite Signals
Your aera must acquire GPS (Global
Positioning System) satellite signals to
navigate. If you are indoors, near tall
buildings or trees, or in a parking garage,
your aera cannot acquire satellites. Go
outside to an area free from tall obstructions
to use your aera.
When your aera has acquired satellite
signals, the signal strength bars on the Menu
page are green
. When it loses satellite
signals, the bars turn red or clear
.
For more information about GPS, go to
Removing the aera and
Mount
To remove the aera from the cradle, press the
button on the side of the cradle, and tilt the
aera forward.
To remove the cradle from the friction
mount, turn the cradle to the right or the left.
Apply pressure until the socket on the cradle
releases the ball on the mount.
NOTE
: Reconnecting the cradle to the
friction mount requires significant force.
Press the ball firmly into the socket.
End
piece
Silver tip
Fuse
End
piece
Silver tip
Fuse
Summary of Contents for aera 1900111700
Page 1: ...automotive owner s manual models 500 510 550 560...
Page 51: ......
