2
c530 Owner’s Manual
G
ETTING
S
TARTED
Step 1: Mounting the c530
Select a suitable location to mount the c530 on your windshield. Clean and dry the
selected area of your windshield.
➌
➊
➋
Windshield
1. Plug the power cable into the back of the c530.
2. Place the suction cup on the windshield. Flip the lever back, toward the windshield.
3. Snap the socket on the back of the c530 onto the ball at the end of the suction cup
mount.
4. Plug the power cable into a power receptacle in your vehicle. Your unit should turn
on automatically if it is plugged in and your vehicle is running.
To remove the c530 from the mount, turn the c530 as far as you can to the right or left.
Apply pressure in that direction until the c530 snaps off the mount.
To remove the suction cup from the windshield, flip the lever toward you. Pull the tab
on the suction cup toward you.