2
Select a track.
3
Select .
The beginning and the end of the track are marked by flags.
4
Select the information bar along the top of the screen.
Information about the track is listed.
Viewing the Elevation Plot of a Track
1
Select
Track Manager
.
2
Select a track.
3
Select .
Navigating to the Start of a Track
You can navigate back to the beginning of a track. This can be
helpful when finding your way back to camp or the trail head.
1
Select
Track Manager
>
My Track
> .
2
Select
TracBack
.
Changing the Track Color
1
Select
Track Manager
.
2
Select a track.
3
Select >
Color
.
4
Select a color.
Saving the Current Track
1
From the main menu, select
Track Manager
.
2
Select
My Track
>
Save
.
Clearing the Current Track
Select
Track Manager
>
My Track
>
Discard
.
Deleting a Track
1
Select
Track Manager
.
2
Select a track.
3
Select >
Delete
.
Navigation
You can navigate routes and tracks to a waypoint, geocache, or
any saved location in the device. You can use the map or the
compass to navigate to your destination.
Map
represents your location on the map. As you travel, the icon
moves and leaves a track log. Waypoint names and symbols
appear on the map. When you are navigating to a destination,
your route is marked with a line on the map.
When the map orientation is Track Up, objects on the map
appear to rotate around your position. As you travel, the entire
map reorients in the direction you are facing. You can stabilize
the objects by setting the orientation to North Up (
).
To open the map, select .
Measuring Distance on the Map
You can measure the distance between two locations.
1
From the map, select a location.
2
Select >
Measure Distance
>
Use
.
3
Move the pin to another location on the map.
Compass
The handheld device has a 3-axis, tilt-compensated compass.
You can use a bearing pointer or a course pointer to navigate to
your destination.
Calibrating the Compass
NOTICE
Calibrate the electronic compass outdoors. To improve heading
accuracy, do not stand near objects that influence magnetic
fields, such as vehicles, buildings, and overhead power lines.
You should calibrate the compass after moving long distances,
experiencing temperature changes, or removing the battery.
1
Select
Compass
> >
Calibrate Compass
>
Start
.
2
Follow the on-screen instructions.
Navigating with the Bearing Pointer
When navigating to a destination, points to your destination,
regardless of the direction you are moving.
1
While navigating to a destination, select
Compass
.
2
Turn until points toward the top of the compass, and
continue moving in that direction to the destination.
Where To? Menu
You can use the Where To? menu to find a destination to
navigate to. Not all Where To? categories are available in all
areas and maps.
Finding a Waypoint by Name
1
Select
Navigation
>
Where To?
>
Waypoints
> >
Spell
Search
.
2
Enter the name.
3
Select .
Navigating with Sight 'N Go
You can point the device at an object in the distance, lock in the
direction, and navigate to the object.
1
Select
Navigation
>
Compass
> >
Sight 'N Go
.
2
Point the device at an object.
3
Select
Lock Direction
>
Set Course
.
Elevation Plot
By default, the elevation plot displays the elevation for an
elapsed time.
To open the elevation plot, select
Track Manager
>
My Track
>
.
Calibrating the Barometric Altimeter
You can calibrate the barometric altimeter manually if you know
the correct elevation or the correct barometric pressure.
1
Go to a location where the elevation or barometric pressure
is known.
2
Select
Track Manager
>
My Track
> > >
Altimeter
Setup
>
Calibrate Altimeter
.
3
Follow the on-screen instructions.
Navigating to a Point on the Plot
1
Select
Track Manager
>
My Track
> .
2
Select an individual point on the plot.
3
Select >
View Map
.
4
Select
Go
.
Changing the Plot Type
You can change the elevation plot to display pressure and
elevation over time or distance.
1
Select
Track Manager
>
My Track
> > >
Altimeter
Setup
>
Plot Type
.
2
Select an option.
Navigation
13
